Click image to view original
This is a pretty large airwolf, the fuse from nose to tail fin being 1790mm long.
once you get the box, you will know its huge. And it does come with a lot of goodies. You can set this helicopter up in no time with nothing but allen keys, screwdrivers and a little bit of glue to get some scale parts on that could be damaged easily in transport if prefitted.
On the 800 size we incorporated a teetering rotor head design and metail blade grips, so you just set it up like any 3D machine. The item starting to leave our factory door on 10th of october.
Description:
Robans new 800 size Airwolf is now available. It's the sixth product in our Super Scale series.
Our new True Scale Design locates the cockpit exactly at the right spot, unlike on most canopies based on 3D mechanics. The compact mechanic is built into the engine compartment, just like on a real helicopter. Therefore it allows space for front to back scale cockpit seats. The position light system programmable with 9 different patterns is preinstalled.
The fuselage of the Airwolf stands out through the detailed crafted surface details and the overall correctly scaled down shape. This unique scale look and details stun and make it hard to see the difference to a real helicopter.
The helicopter comes with a detailed instruction manual. The setup is simple and quick, the mechanics are completely preassembled - yet have to be setup with electronics. only screw drivers and allen keys are required to make it airborne.
Features:
- Dual Blade Rotorhead and scale carbon fiber rotor blades included
- Dual Tail Blade and scale carbon fiber tail blades included
- Extremely detailed surface details, a realism unknown in this size class
-Complete seven seated scale cockpit
- Complete built in / preinstalled position lighting system (controllable via aux channel)
- Special CCPM mechanics built in the top section, as on a real helicopter
- Use of 750MX standard equipment (12S battery, 530KV motor), fly with your existing parts
- Take off weight of 9kg (about the double than a 700 3D helicopter)
- 1794mm long
-Product comes preassembled and requires very few work to mobilize it
Spec:
Body length: 1794mm
Length incl. rotors: 1850mm
Width: 580mm
Height: 510mm
Main rotor diameter 1660mm
Main blade length: 750mm
Tail rotor diameter: 280mm
Tail blade length: 105mm
Main shaft diameter: 12mm
Tail shaft diameter: 5mm
Spindle diameter: 8mm
Main blade count: 2
Tail blade count: 2
Drive gear ratio:
1:13.8:4.7
Motor:* 1x 750MX 530KV brushless outrunner , 12S capable
Speed controller:* 1x 120A brushless, 12S capable
Servo:* 3x metal gear cyclic, 1x metal gear tail servo
Battery:* 44.4V 5000mAh 30C+
Flight time: 5 minutes
Takeoff weight: 8500g
Flight Stabilization:* 3 axis flybarless gyro
Radio Control:* min. 6 channel with pitch and throttle curves