Click image to view original
The plant consists of a base with underground foundations and crossing supports on which are placed centerpieces and hydraulic cylinders to lock the floor of the car; a columns structure – using benchmarks and locks, unites the wagon sidewalls, floor and roof. On this structure have been installed four motorized slides (2 upper, 2 lower) complete with clamps and electrodes for spot welding of steel sheets.
On the columns structure is adjusted an extendible platform, at least up to wagon profile which allows operators to access to the upper slides and locking modules of the sidewalls.
A motorized cart will be placed on the fore and rear base for walls welding operations.
The electric control shall be inserted in a closet, centrally placed to the plant.
fresatura
Axis Stroke Speed Acceleration
(mm) (mm/min) (m/sec2)
X1/X2 +/- >200.000 35000 0,75
Y1 -3000 / +3000 37500 2,5
Z1 -20 / +2000 28500 1,3
A2 -27° / +19° 20,7 (deg /sec) 60 (deg / sec2)
A1 -270° / +270° 85,71 (deg /sec) 60 (deg / sec2)
B1 -180° / +180° 85,71 (deg /sec) 60 (deg / sec2)
C1 -270° / +270° 85,71 (deg /sec) 60 (deg / sec2)
Wagon assembly general description plant