Monarch Models

Model: A-CF007

1 Units in Stock

Manufactured by: Ripmax

Overview

The new Wots Wot biplane is the latest model in the growing range of Chris Foss designed ARTF aircraft, and has (by general agreement) the best flying characteristics of them all! With its sleek aerodynamic design and relatively large wing area the Wots Wot has incredible low speed handling, being able to fly at amazingly slow flying speeds, yet open the throttle and the aerobatic performance and precision is truly outstanding! Suitable for I/C use with .70 to .81 four stroke engines or electric power with suitable motor and 5 cell battery pack, the Wots Wot is compact enough to fit into most cars in one piece, even hatchbacks, however the model has been optimised for rapid assembly/disassembly, requiring only 6 screws tightening and 2 clevises connected.

The model is supplied as an airframe only, with separate I/C and electric power option fitting packs, the I/C pack containing engine mount, fuel tank, spinner and throttle linkage, the electric pack has motor mount, battery mounting tray with 2 battery straps, magnetically attached hatch cover and mounting frame and spinner with alloy backplate. Flight times of over 12 minutes of mixed flying were achieved during test flying of the prototype models using a 5S 4500 mAh battery pack!

• Fully built-up from balsa and ply for maximum strength and lightness

• Pre-painted fibreglass cowling

• Pre-formed alloy undercarriage

• Tinted canopy and pre-painted pilot figure

• Factory covered in high quality heat shrink film

• Comprehensive set of accessories

• Detailed full colour manual

Specification

Wingspan:         1,280 mm (50”)

Length:                 1,150mm (45")

Weight:                 3.2kg (7lbs)

Servos:                 4-5 Standard (Required)

Radio System: 4 Channel (Required)

Electric Motor: Quantum 55 (Required)

IC Engine:        .70-.81 4-Stroke (Required)

Speed Controller: 60A (Required)

LiPo:                 5S 3,200 - 5,000mAh (Required)

Needed to complete

Ripmax WOTs WOT ARTF I/C Pack   A-CF007/ICP

To enable the WOTs WOT to be powered by a suitable four stroke engine this ancillary pack is required, containing the correct size fuel tank, engine mount with screws, spinner and complete throttle linkage.

Ripmax WOTs WOT ARTF Electric Pack A-CF007/ELP  

The WOTs WOT electric ancillaries pack contains all that is required to enable the fitment of a suitable electric motor and speed controller to the model, and includes high quality spinner with aluminium backplate, 4 alloy stand-offs and pre-drilled motor mounting plate, battery mount with 2 battery plates, magnetically secured battery hatch cover and mounting frame, and required fasteners.