Click image to view original
The EasyGlider PRO is based on the popular and proven Easy-Glider and EasyGlider electric.
The EasyGlider PRO is designed for brushless outrunner motors and LiPo batteries, and a matching power set is available under # 33 2636 or - if you want a little more oomph - the upgrade power set # 33 2642. However, the model can also be built as a pure glider: the kit includes a fuselage nose-cone in which our aero-tow mechanism # 72 3470 can be installed.
The models flying characteristics are just right for the beginner, although this by no means implies that the more advanced pilot wont enjoy it - quite the contrary.
If you are an expert you will soon discover that the EasyGlider PRO behaves like a much bigger model, and its performance is also far better than you might expect.
Kit contents: Moulded ELAPOR parts, GRP spar, all plastic parts required to assemble the model, small items, linkage components, decal sheet, comprehensive, richly illustrated instructions.
• Low sink rate
• Can be ballasted to expand the airspeed range
• Landing aid - both ailerons raised
• Can be finished using any standard spray-can paints after prior treatment with MULTIprimer # 60 2700
• Pre-fabricated moulded ELAPOR parts
• Convenient method of aileron servo connection when the wings are fitted
Needed to complete
1 x EasyGlider Pro powerset (25332636)
2 x Tiny-S servos (2565121)
2 x Nano-S servos (2565120)
1 x 5-channel receiver
SPECIFICATIONS
Electric Motor: Brushless (Req.)
Length: 1130mm
Material: ELAPOR Foam
Radio: 4 Channel (Req.)
Servos: 4 (Req.)
Weight: 800-980g
Wing Loading: 17 g/dm2
Wingspan: 1800mm
Part No: 214226
Item Name: Multiplex EasyGlider Electric Pro
Brand: Multiplex