Click image to view original
Details
FEATURES
State of the art CAD design ensures straight and true assembly
Authentic tailwheel location
Ribbed control surfaces (looks real when they are covered)
Optional retract landing gear, cockpit kit, in-cowl muffer, and
split flaps add to the realism
4-6 channel operation (throttle, elevator, rudder, ailerons (two
servos), optional flaps (two servos) and optional retracts
Selig 8036 and 8037 airfoils
INCLUDES
Die-cut wood pieces
Vacu-formed plastic pieces (wing fairings, canopy, cowling,blisters
Detailed rolled plans/instruction booklet
Engine mount (adjustable)
3/16" wire landing gear (for fixed gear option)
Preshaped leading edges
Many preshaped wood blocks
REQUIREMENTS
4-6 Channel Radio w/5-7 Servos
1-Y-Harness for ailerons
1-Servo Extension for Ailerons
.61-.75 2-stroke or .70-.91 4-stroke engine
Propeller: Depending on engine seleced. Four blade prop should only
be used for static display
2-3.5" Main Wheels
1-1.25" Tailwheel
Exhaust header
2-wheel collars 3/32", 12oz fuel tank, fuel filler valve,
24" medium fuel tubing, ¼" foam rubber, pilot figure, exhaust
deflector, prop
3.5" spinner, the manual recommends a "Spitfire" type spinner for a
more scale appearance. This spinner is no longer available fro
Top Flite. Any 3.5" diameter spinner can be used.
3 plus Rolls Covering with matching Paint
Building and Finishing Tools
COMMENTS
Per Robart, the bushings belong in the housing wher the air cylinder
was placed. They say it offsets a tendency of "binding" the gear
legs.
There is a gentleman now making longer struts for this kit which will
work with a 4" wheel, for a more scale appearance.
For information contact him at:
Lite-Flyte Products
Ray Lightfoot
864-886-0095
lghtfthm@aol.com
Decal sheet SPF6D01 sold only through GP Manufacturing includes:
Two 7" Red & Blue roundels
Two 4" Red, White & Blue roundels
Two 4-5/8" Red, Blue & Yellow roundels
Two 1-5/8" Red, White & Blue roundels
Two each 2½" x 1¾" White L, D, U
Two 3-1/8" x 3¼" Red, White & Blue stripes
Additional Information
Manufacturer: Top Flite
Specification
Length: 53" Thrust angle: 0° down 3° right
Wingspan: 63" Incidence: wing +2° stab +2°
Wing area: 687 sq in Scale: 1/7
Wing loading: 25-28.5oz/sq in
Weight: 7.5-8.5lbs
Center of Gravity: 4-1/8" from the leading edge of the wing
Control Throws: hi rate low rate
Elevator: 5/8" each way ½" each way
Rudder: 1-1/8" each 7/8" each way
Ailerons: ¾" up 5/8" down ½"up 3/8" down