Price:Negotiable
Delivery Date:Within 3 days after your order is confirmed

Offer

Flo-Fit® Alignment Fittings
Flo-Fit Eliminates Pipe Alignment Problems

Marotta’s Flo-Fit is a patented fitting that eliminates pipe alignment problems, reduces stress and provides a leak-free assembly unaffected by shock, vibration or thermal distortion. The aligning stud of the Flo-Fit pivots freely and smoothly over the highly polished ball socket allowing 3.5° swing from center.

This misalignment feature of the Flo-Fit ‘forgives’ cutting and welding assembly errors. The feature also reduces pipe stress caused by distortion in complete assemblies and permits the easy removal of components/pipe sections. This unique design has two seals – both the same size – located close to the internal diameter of the pipe, minimizing pressure separation forces. only a low sealing torque is required. (Sealing torque depends on pipe size and line pressure.)

6-45050-Alignment

6-450150-Alignment(2)

Features:

3.5º deflection from center in any quadrant
Pipe sections/components are easily removed with out bending or stress
Non-restricted flow path
Compact size for simplified installation and handling, reduces space and weight requirements
Line pressures up to 10,000 psig
Burst 4:1
Seals of Buna N, Teflon, Copper, etc.
Materials – 300 & 400 series stainless and other weldable materials available on request
Butt or socket weld ends.
MARGIN FOR MISALIGNMENT: Tangent of angle time pipe length equals inches of misalignment from center; i.e. misalignment in 10 feet of pipe approximately 7 inches from center.