Details

FEATURES

State of the art CAD design ensures straight and true assembly

Authentic tailwheel location

Ribbed control surfaces (looks real when they are covered)

Optional retract landing gear, cockpit kit, in-cowl muffer, and

split flaps add to the realism

4-6 channel operation (throttle, elevator, rudder, ailerons (two

servos), optional flaps (two servos) and optional retracts

Selig 8036 and 8037 airfoils

INCLUDES

Die-cut wood pieces

Vacu-formed plastic pieces (wing fairings, canopy, cowling,blisters

Detailed rolled plans/instruction booklet

Engine mount (adjustable)

3/16" wire landing gear (for fixed gear option)

Preshaped leading edges

Many preshaped wood blocks

REQUIREMENTS

4-6 Channel Radio w/5-7 Servos

1-Y-Harness for ailerons

1-Servo Extension for Ailerons

.61-.75 2-stroke or .70-.91 4-stroke engine

Propeller: Depending on engine seleced. Four blade prop should only

be used for static display

2-3.5" Main Wheels

1-1.25" Tailwheel

Exhaust header

2-wheel collars 3/32", 12oz fuel tank, fuel filler valve,

24" medium fuel tubing, ¼" foam rubber, pilot figure, exhaust

deflector, prop

3.5" spinner, the manual recommends a "Spitfire" type spinner for a

more scale appearance. This spinner is no longer available fro

Top Flite. Any 3.5" diameter spinner can be used.

3 plus Rolls Covering with matching Paint

Building and Finishing Tools

COMMENTS

Per Robart, the bushings belong in the housing wher the air cylinder

was placed. They say it offsets a tendency of "binding" the gear

legs.

There is a gentleman now making longer struts for this kit which will

work with a 4" wheel, for a more scale appearance.

For information contact him at:

Lite-Flyte Products

Ray Lightfoot

864-886-0095

lghtfthm@aol.com

Decal sheet SPF6D01 sold only through GP Manufacturing includes:

Two 7" Red & Blue roundels

Two 4" Red, White & Blue roundels

Two 4-5/8" Red, Blue & Yellow roundels

Two 1-5/8" Red, White & Blue roundels

Two each 2½" x 1¾" White L, D, U

Two 3-1/8" x 3¼" Red, White & Blue stripes

Additional Information

Manufacturer: Top Flite

Specification

Length: 53" Thrust angle: 0° down 3° right

Wingspan: 63" Incidence: wing +2° stab +2°

Wing area: 687 sq in Scale: 1/7

Wing loading: 25-28.5oz/sq in

Weight: 7.5-8.5lbs

Center of Gravity: 4-1/8" from the leading edge of the wing

Control Throws: hi rate low rate

Elevator: 5/8" each way ½" each way

Rudder: 1-1/8" each 7/8" each way

Ailerons: ¾" up 5/8" down ½"up 3/8" down