Feature:

1.The firmware is upgraded recently .

2.Two way communication while connecting it with computer.

3.Firmware can be upgraded by user.

4.Motor cable can be inspected while Connecting the power battery

5.Simply set function value by Prog-Box or by PC via USB link wire.

6.Li-MH/Li-Po,Ne-Cd/Ne-mH,LiFe battery can be use.

7.Enables setting the voltage per cell for the point at which the controller’s cut off circuitry engages.Li-MH/Li-Po from 2.0-3.6V,Ne-Cd/Ne-.4-1.0V,LiFe from2.2-2.8V

8.Reverse function. the delay time of reverse is adjustable

9.The power of the motor forward/ reverse can be set.

10.Automatically detection the throttle route or can be set a fixed number by manual operation. 11.Auto cut off the power within 3 seconds if no radio signs.

12.Timing setting may be adjusted (0°-30°) to suit the motor type.