Thermal Imager Channel
Thermal Sensitivity < 12mK@ 25˚C
F# 1.1
Field of View 18° with 30mm lens or 7.3° with 75mm lens
Focus Adjusted to infinity
Focusing N/A
Digital Zoom Continuous up to 8x
Detector
Type Cooled high sensitivity, 320 x 240 pixels
Spectral Range 3 - 4µm
Digital Video Camera
Color Digital Camera Channel Full HD
Digital Zoom Continuous up to 4x
Power Input
Voltage 12 VDC
Power Consumption 16W
Physical Characteristics
Weight 24 kg with sun shield
Color Natural silver natural, stainless steel
Size in (L x D) 310mm X 195mm (122” x 76.8”) without sun shield
Interface Four threaded UNC 1/4” and tripod mounting UNC 1/4”, rotation safe
Environmental Conditions
Operating temperature range -33°C to + 50°C
Storage temperature range -40° to + 70°C
Temperature and humidity IEC 60068-2-30 Temp. +25°C / +40°C Humidity 95% RH
EMC/ EMI FCC 47 CFR part 15 subpart B - Radiated Emissions EN 610000-6-4 : 2007 class A -
Radiated Emissions
EN 610000-6-2: 2005 class A - Immunity to Electrostatic Discharge (ESD) EN 610000-6-
2: 2005 class A - Radiated Immunity to RFE
EN 610000-6-2: 2005 class A - Radiated Immunity to Power Frequency magnetic field
Vibration 2.4 GRMS Random Vibration
Water and dust protection IP66
HALT - High Accelerated Life Test Vibration level: Max temp.: 55 deg, Min temp.: -20 deg
Safety EN60950-1:2006
Safety Certifications -NEC 500 for Class1 Division I
-IECEx
-ANSI/ISA-12.12.01 - Non-incendive Electrical Equipment for Use in Class I and II, Division 2, and Class III Hazardous (Classified) Locations
-ATEX Ex d II 2G T6
Lightening protection On power and Ethernet lines
Environmental Conditions when Packed in Carrying Case
Free fall (drop) test ASTM-D 4169-06 Schedule A
Loose cargo vibration test ASTM-D 4169-08 Schedule F Test method D999
Vibration ASTM-D 4169-08 Schedule F Test method D999
Gas Leak Detection Performance
Operation features -Enhanced and normal thermal modes and PIP with the color image.

-Automatic detection of a gas leak allowing video streaming on a screen display of the colorized leak in the control room for decision making, or dry contact for designated control or shut-down command.

-24/7 continuous operation monitoring and alarm.

-Video selection Thermal/Color over Ethernet.
Designed for detection of: Methane, Ethylene, 1-Hexane, Propanal, Propanol, 1,3-Butadiene, 1-Butene, Propylene 1-pentene,
Styrene, Toluene, Acetic acid, Xylene, 1,2-dimethyl-Benzene, Isobutylene , Isoprene,
Benzene, Ethyl benzene, Ethylene oxide, Hexane, Methanol, Propylene oxide, Propylene,
Ethane, Octane, Heptane, Isopropyl alcohol, MEK Methyl Ethyl Ketone 2-butanone,
Propane, Butane, Pentane.