WALKERA F210 3D Edition FPV Racing Quadcopter RTF

F210 3D Edition Features:

The F210 3D Edition body is created using CFP for outstanding crash survivability

Modern industrial and modular design, improves the prodyct performance and permit easy maintainance and upgrades

Advanced 5.8GHz live video and OSD system, for a unforgettable visual FPV experience

The F210 3D Edition employ a modern flight control system for acrobatic flight routines such as roll, flip and race courstte moves

The F210 3D Edition feature 4 useful flight modes, 2D Stabilize / Intermediate / Advanced(RATE) Flight modes are selected by the MIX switch and 3D semi-automatic / Manual Flight modes are selected by the FMOD switch

F210 3D Edition Specification:

Main Rotor Dia.: 128mm

Receiver: DEVO-RX713

Main Controller: FCS-F210(F3D)

Image Transmitter: TX5825(FCC)/TX5824(CE)

OSD: F210 OSD

Brushless Motor: WK-WS-28-014A(CW/CCW)KV2500

Brushless ESC: F210 3D(CW/CCW)

Battery: 14.8V 1300mAh 40C 4S Li-Po

2D Flight Time: 8~9 mins

3D Flight Time: about 5 mins

Working temperature: -10°C ~ +40°C

Weight: 370g (Battery excluded)

Dimension: 182*182*103mm

700TVL Video Camera Specification:

Horizontal Resolution: 700TVL

System Commitee: PAL/NTSC

Video Out: 1.0Vp-p/75Ω

Power Input: DC 12V

TX5825(FCC)/TX5824(CE) Specification:

5.8G wireless: image transmission

TX5825(FCC) Bind B section: 4 channels

TX5824(CE) Bind B section: 8 channels

TX5825(FCC) output power: ≤200mW

TX5824(CE) output power: ≤25mW

Package Included:

F210 3D Edition

OSD

700TVL camera

TX5825(FCC)/TX5824(CE) image transmitter

DEVO 7 transmitter

14.8V 1300mAh 40C 4S Li-Po

Li-Po battery charger

Instruction manual

All helicopter / drone were setup and tested by skilled technican before delivery

As 2.4Ghz technology do not require any frequency contorl. Makes this mode a lot safer to operate and don't have to worry about bringing the wrong crystal to the flying field

Design for RACER / PROFESSIonAL pilot