6 port Pneumatic Interlok Valve
The Product Which Launched the Company, the PIV (Pneumatic Interlok Valve) is as Unique Today as it was at Inception, is a rotary selecor or distributor for use in small bore piping systems at pressures up to 10bar. It is a relatively simple and therefore extremely reliable unit, based on a modular design and as such configurable for a multitude of applications. It is custom built fro stock parts. The Rotary selecor Valve body is manufactured in brass or stainless steel, both havin stainless spindles and can have stems and seals in differing materials to suit the media being used.
Each Rotary Selector Valve bank is pneumatically independent but linked by a common central spindle, enabling separate air paths to be controlled concurrently; each output is effectively a valve in itself. The Rotary Selector Valve can incorporate an integral electrical rotary switch which allows fluid and electrical circuits to be controlled simultaneously, or can be used simply to provide positional indication remotely at the control centre.
The valve was first introduced in the late 1950’s, has remained largely unaltered, and due to its versatility is widely used in industry for a vast range of applications involving the switching of liquids, vapours and gases.
A Fluid Control Valve Suitable For Air/Gases/Vapours and other Liquids, Pressure range –1 +10 Bar, Fluid Temperature 85°C (185°F) Available in Brass and Stainless Steel, with Fluoro-Elastomer Seals and PTFE or ACETAL Resin Stems, depending on the nature of the fluid or gas being used.
Positive Positioning comes fro an indexing mechanism allowing the operator to have a genuine feel of the valves various positions, eliminating the possibility of the valve being left in mid position. Flexibility comes from the fact that each valve can have its own unique inner spindle, so with multibank valves each bank can have its own configuration
Should it be required, security is provided by key locking the valve. Stainless steel versions are available for harsh environments
Electrical Interface is provided from a rotary electrical switch directly coupled to the spindle and mounted on the base of the valve.
Standard configurations or custom built to your specification with no cost penalty.
Eliminates cross leakage of multiport ball valves
Modular construction, available in either 4 or 6 port versions.
Brass or stainless steel.
Multi banks can accommodate different media
Fluid and gas can be switched simultaneously
Electric switches can be fitted for positional indication or controlling associated equipment
We can provide in any combination
Locking handles
PTFE stems
Weatherproof enclosures
Explosion proof switches
Spring Returns
